飞利浦照明-浦恩节能 飞利浦照明-首页 飞利浦照明-公司介绍 飞利浦照明-解决方案 飞利浦照明-应用案例 飞利浦照明-留言反馈 飞利浦照明-联系我们
 飞利浦商业照明-嵌入式筒灯 Nova...
 飞利浦嵌入式筒灯 Twistline(飞...
 飞利浦商业照明标准
 店面照明设计与气氛营造
 立交桥景观照明设计
 照明设计知识
 公园照明设计
 会议室的灯光照明设计
 建筑物夜景照明的设计方法
 商业照明设计的心理因素
 商业环境照明设计
 城市道路照明的规划设计
 高杆灯设计规则
 灯光设计师的五种灯光搭配术
 室内照明设计的照明方式

 
Comprehensive office control using the Philips Lightmaseter Range
发布时间:2012-05-25           浏览量:3408 次

The Philips LightMaster range has been developed to ensure easy integration into tday’s modern office environment,for either retrofit or new installatinons.

Load Actuators
The heart of the automation system, the Philips LightMaster ange of load actuators can directly drive different lighting roups within a project and allows the system to be ompatible with any lamp type and lighting control protocol. hilips LightMaster load actuators are the ideal choice for ombining feature rich lighting control requirements with uperior build quality to continuously perform problem free.

All load actuators support the KNX industry-standard ETSware to communicate with other devices on the KNX etwork. Other third-party devices can use this same network o communicate with the LightMaster devices. A combination f load actuator devices can be selected to work seamlessly ogether to achieve common project design goals.

User Interfaces
Providing end-users with an intuitive means of interaction ith the lighting system, Philips LightMaster user interfaces ncludes wall panels and universal sensors.

panels
A local control panel allows occupants to adjust the lighting ontrol system to suit their requirements. To help perform he various functions required of the control system and help sers to intuitively interact with the many different features, ach panel is powered directly from the network and herefore require no mains wiring. Panels can be individually onfigured via the KNX industry standard ETS commissioning  sftware to erform simple or complex logical functions. hilips LightMaster panels bring the full power of the control ystem to the single touch of a button.

sensors
Offering the ability to interact with project spaces passively, he Philips LightMaster sensor range brings the features of otion detection and light level detection into one unit, in a ompact and aesthetic solution.Each of the features can be perating at the same time, allowing automation scenarios uch as turning on the lights after detecting motion and then imming the lighting level once the available sunlight has been easured, providing additional energy savings. After the area as been unoccupied for the predetermined time, the lights ill then switch off. Combining each of these functions nto he one device reduces the need for many different types of ensors cluttering the ceiling space.Each sensor has an inbuilt icroprocessor, allowing for logical functions to control a mall room,the floor of a building or an entire building.All  sesors eceive their power from the KNX network and as hey are fully remotely programmable,they can be onfigured toautomate and control virtually an unlimited number of
c trolled outputs.

Network Devices

Dry Contact lnterface(DCI)
Philips LightMaster DCI’s are designed to allow mechanical witches and relays to nterface to the KNX network. The unction of each input is programmable and the small size f the product combined with the inputs being presented akes it perfect for installation behind multi-gang switch grids. n addition to being used as a simple dry contact interface, hese DCI's have a'motion detector' mode that tums a third-party otion detector into a fully featured KNX sensor.

Line Coupler
The Philips LightMaster line coupler can be used to link a line o a second line in order to extend the network or it can be
􀁙􀁗􀁉􀁈􀀃􀁘􀁓􀀃􀁐􀁍􀁒􀁏􀀃􀁅􀀃􀁐􀁍􀁒􀁉􀀃􀁘􀁓􀀃􀁅􀀃􀁑􀁅􀁍􀁒􀀃􀁐􀁍􀁒􀁉􀀃􀀌􀁓􀁖􀀃􀁆􀁅􀁇􀁏􀁆􀁓􀁒􀁉􀀍􀀒􀀃􀀭􀁒􀀃􀁘􀁌􀁍􀁗􀀃􀁖􀁉􀁗􀁔􀁉􀁇􀁘􀀃
􀁍􀁘􀀃􀁔􀁖􀁓􀁚􀁍􀁈􀁉􀁗􀀃􀁉􀁐􀁉􀁇􀁘􀁖􀁍􀁇􀁅􀁐􀀃􀁍􀁗􀁓􀁐􀁅􀁘􀁍􀁓􀁒􀀃􀁅􀁒􀁈􀀃􀁑􀁉􀁗􀁗􀁅􀁋􀁉􀀃􀀌􀁘􀁉􀁐􀁉􀁋􀁖􀁅􀁑􀀍􀀃􀂽􀁐􀁘􀁉􀁖􀁍􀁒􀁋􀀒

                
Copyright © 2009-2017 飞利浦照明-上海浦恩照明电器有限公司. All Rights Reserved.
沪ICP备17045519号-1      沪公网安备 31011402002143号      技术支持:上海网站建设-博维数据